Blueway Three-in-One Dehumidification Heat Pumps Ship to Shandong, China

About Blueway: Twenty Years of Building Climate Systems

Blueway has built its business on a single conviction: a dehumidification or heat pump unit should not merely meet a specification sheet — it should reduce what a building spends on energy for the next twenty years. Since its establishment, the company has concentrated on the research, development, manufacturing and sale of refrigeration, HVAC and purification products, and on delivering high-efficiency, energy-saving solutions to customers worldwide. Its technical direction follows the sustainability of new energy technology and the long-term requirement of energy conservation and environmental protection.

Manufacturing takes place in Shunde, Guangdong, one of the most established HVAC manufacturing clusters in southern China, where the company operates its R&D and production base. A separate technical application research center in Shenzhen handles system design, applied engineering and performance validation. The two sites work as one loop: the Shunde plant builds and factory-tests the machine; the Shenzhen center decides how that machine should be selected, piped, ducted and controlled on a real project.

Years of work in heat pump and purification technology have produced dozens of national patents. Blueway holds the High-Tech Enterprise designation, has taken part in the drafting of industry standards, and has products listed in the national catalogue of high-tech products. Within the Foshan HVAC industry the company holds a leading position, and it has grown into a technology-innovating front runner and a reliable service provider of building heating and cooling solutions.

Service centers now cover Beijing, Shanghai, Chongqing, Guangzhou, Shenzhen, Wuhan, Xi'an, Nanjing, Xiamen, Suzhou, Changsha and Yinchuan, so that a project in any of these regions is reached by a local engineer rather than a distant head office. Overseas operating centers and authorized distributors serve customers in Europe, the Americas and the Middle East, and products are exported to more than thirty countries.

Core Products and Turnkey Solutions

Blueway equipment is specified mostly for hotels, hospitals, pharmaceutical plants, office towers, villas, clubs, museums, stadiums and factories. The product range includes medical clean-room air conditioning, indoor swimming pool dehumidification heat pumps, combined evaporative-condensing chiller and heat pump units, fresh-air heat-recovery dehumidification heat pumps, villa comfort dehumidification air-conditioning heat pumps, air purifiers, heat-recovery air-conditioning heat pumps, air-source heat pumps, water-source heat pumps and multi-function heat pumps.

What the company delivers more often than a single machine is a complete scheme: medical cleanroom solutions, constant temperature and humidity for indoor swimming pools, constant temperature and humidity for villas, and energy-saving retrofit for existing buildings, together with consulting, diagnosis and optimization of the whole heating and cooling system. Where a project falls outside the standard catalogue, the unit is developed around the owner's own operating conditions instead of being forced into an existing model.

Why the Three-in-One Dehumidification Heat Pump

The three-in-one dehumidification heat pump is the product that best explains Blueway's technical approach. "Three-in-one" means dehumidification, cooling (space air conditioning) and heating (space heating plus pool water heating) are handled by one packaged unit, rather than by three separate systems sharing one plant room.

One machine instead of three. In a conventional pool plant room, a dehumidifier, an air-conditioning unit and a pool water heater or boiler each occupy their own footprint, each with its own piping, wiring and control panel. Combining them cuts plant room area, pipe runs, interfaces and commissioning time — and usually the capital cost as well.

Recovered heat instead of burned fuel. Pool hall air is warm and permanently humid, and that heat used to disappear with the exhaust air. The unit recovers sensible and latent heat from the exhaust airstream and returns it to the pool water and the supply air, so the external energy needed to hold pool temperature drops substantially and running cost follows.

Built for a wet, chloride-bearing environment. Air in a pool hall sits close to saturation, and disinfectant by-products make it corrosive. Coils, casing, fasteners and electrical components are specified for continuous wet service with chloride exposure, so the machine does not develop refrigerant leaks, corrosion or electrical faults two or three years after commissioning.

Intelligent control and remote support. A programmable controller coordinates supply and return fans, compressors and pumps, switches automatically between dehumidification, cooling and heating according to the temperature and humidity curve that has been set, and provides frost protection, over-pressure protection and fault logging. Remote monitoring means an engineer in Shunde can watch the operating data of a plant room in Jinan.

Year-round operation. Cooling and dehumidification in summer, dehumidification in the shoulder seasons, heating and pool water warming in winter — the unit does not shut down or change over seasonally, so the hall keeps its temperature and humidity without the fluctuation that equipment switching always brings.

Shipping to Shandong: From Factory Test to Loaded Trailer

The units shipped this month belong to a customer order from Shandong Province, China. Before packing, every machine went through the full factory routine: casing and insulation inspection, refrigerant circuit pressure and leak testing, electrical safety and control-function verification, and a trial run covering the changeover between dehumidification, cooling and heating modes. Only units that passed were released for packing.

Each unit is carried on a timber skid, wrapped first in a moisture-barrier film and then fully enclosed in stretch wrap, and secured with steel and plastic strapping. Loading onto the flatbed trailer is planned around the transport route and the lifting conditions at the site, so that the machine arrives in the sequence the contractor can actually receive it.

Road transport from Shunde to Shandong takes several days; the departure date is aligned in advance with the customer and the installation contractor, so that the equipment does not sit idle on site waiting for a crane or a finished plant room. Blueway's regional service center then supports unloading, positioning, commissioning and operator training.

For hotel pools, club and villa pools, sports and rehabilitation centers, and hospital clean spaces in Shandong and northern China, the Blueway team provides load calculation, unit selection, piping and duct layout advice, commissioning support and after-sales response. Product information and project references are available at www.bluewayhp.com.